A2608 M

GEARED HEAD MILLING MACHINE

ARBOGA A2608M: When the set drill depth is reached, the spindle will automatically return to the starting point. The feed gear box is provided with an automatic overload protection device, which intervenes when the drill pressure is too high. The feed can also be interrupted manually.

Standard Features

  • Power feed (M) - When the set drill depth is reached, the spindle will automatically return to the starting point. The feed gear box is provided with an automatic overload protection device, which intervenes when the drill pressure is too high. The feed can also be interrupted manually.
  • Table - The table is made from high quality cast iron, complete with T-slots and coolant channel. The table is mounted on a rigid arm turntable, turning 360° around the column. An easy to reach crank handle is fitted for elevating and lowering the table to the correct working height.
  • Column - The column is made from steel, ensuring machine rigidity and precision with the minimum of deviation from the stipulated angle between the drill and the table.
  • Base plate - The machine is equipped with a plane base plate.
  • Safety - The machine is supplied with a thermal switch, no-volt release and emergency stop. Chuck guard is standard within CE area. (Optional outside CE area).
  • Drill head - The drill head is adjustable 360° around the column and can be raised and lowered.
  • Gear box - The gear box is built according to our experienced methods for highest possible torque. Helical gears combined with steel gears against reinforced fiber gears in the main gear box ensure higher operating efficiency, a more powerful drive and smooth operation. The noise level and maintenance of the gear box is reduced to a minimum.
  • Spindle - The spindle is mounted in ball and roller bearings and the lower spindle roller bearing is placed as near to the lower part of the spindle as possible, ensuring greater precision and stability. It is adjusted by the journals in the bearing, which guarantees very small tolerances. The spindle is counterbalanced by a tension spring and the spindle return can be adjusted depending on the weight of the tool. There is also a built-in tool ejector for rapid tool exchange.

Optional Features

  • Tool package - Machine vice, 2 x T-slot nuts, Chuck 1-13 mm B 16 Metabo with arbor, Reduction sleeves
  • Automatic reversing - Automatic reversing with micro switch for tapping. Maximum 5 reversals per minute.
  • Coolant equipment - Complete tank (15 l), pump with switch and all tubing’s with accessories.
  • Hand reversing switch - Hand reversing switch for manual tapping.
  • Foot operated reversing switch - Foot pedal for changing rotation direction of tapping operations.
  •  Foot operated start switch - Start and stop pedal. Only for spindle motor, not for power feed.
  • Machine light - MSC Machine light, LED lamp
  • Drill chuck with arbor - 0-13mm, 3-16mm or 5-20mm
  • Milling chuck - Collets ER 6,8,10,12,16 mm (MT3) or 6,8,10,12,20mm (MT4).
  • Threaded spindle nose with locking nut - Threaded spindle nose with locking nut for securing milling chuck with collets.
  • Drill set 25 pcs. - Drill kit 25 pcs. Ø 1 – 13mm x 0,5mm. TIN-coated.
  • Milling table FB101 - Clamping area -  450x242mm. Longitudinal feed 275mm. Cross feed 155mm. Incl. intermediate plate.
  • Milling table FB102 - Clamping area 584x242mm. Longitudinal feed 415mm. Cross feed 155mm. Incl. intermediate plate.
  • Milling table FB402 - With automatick longitudinal feed. Clamping area 584x242mm. Longitudinal feed 415mm. Cross feed 155mm. Incl. intermediate plate.
  • Machined baseplate - Baseplate with 2 T-slots.
  • Digital depth stop readout - Digital readout for drill depth.
  • Connection cable - Cable 3m or 5m, with 16A CE plug
  • Tap and drill set - 18 pc. M2,5-12 mm
  • Emergency foot switch
  • Chuck guard with/without micro switch - Chuck guard with micro switch is standard on machines within EU.
  • Locking device for spindle quill - Locking of the spindle quill during milling operations.

Machine Specs