ad-r series 

CNC PRESS BRAKE

The AD-R series gives you a range of value oriented Press Brakes. With their large stroke, daylight, and throat allows cost effective production of simple to complex large shapes.

Standard Features

  • Y1, Y2, X - 3 Axes
  • Control Unit - CNC Easy Back gauge - motorised & linear guide & ball bearing system
  • Back gauge fingers - height adjustable
  • European Clamping system
  • Sliding sheet support Arms with T-Canal and Tilting stop
  • CNC controlled motorized Crowning (only on 6 metres)
  • Special designed - worldclass hydraulics blocks & valves
  • Worldclass electronics system

Features

  Top beam guiding  Double guides are long and accurate for easy sliding of top beam

Top beam guiding
Double guides are long and accurate for easy sliding of top beam

  High Stroke - Daylight - Throat High Working Space  AD-R machines offers wide spaces for ease of operation also reduces cycle times.

High Stroke - Daylight - Throat High Working Space
AD-R machines offers wide spaces for ease of operation also reduces cycle times.

  Back Gauge X axis motorized CNC controlled  R axis manually height adjustable finger block  Fingers` depth is calculated by CNC controller and executes X axis.Retraction is also a standard feature to acquire accurate parts. Back gauge fingers are easily adjusted on linear guides by ball integrated motion system.

Back Gauge X axis motorized CNC controlled
R axis manually height adjustable finger block

Fingers` depth is calculated by CNC controller and executes X axis.Retraction is also a standard feature to acquire accurate parts. Back gauge fingers are easily adjusted on linear guides by ball integrated motion system.

  Sliding Front Arms  Quickset support arms are mounted on a linear guide way and ball bearing system that allows “finger tip” lateral adjustment of the front support arms. Vertically adjustment is also easily achieved.

Sliding Front Arms
Quickset support arms are mounted on a linear guide way and ball bearing system that allows “finger tip” lateral adjustment of the front support arms. Vertically adjustment is also easily achieved.

Tool Systems

 
  Euro style top tool & 4 V die  Euro style tool holders offers precise tool setup by their ground surfaces.

Euro style top tool & 4 V die
Euro style tool holders offers precise tool setup by their ground surfaces.

  Quick release clamping

Quick release clamping

  Durma multi V bottom tool

Durma multi V bottom tool

 

Optional Features

  • Control Unit - CNC Advantage Series - 2D Graphic & Offline Software
  • Control Unit - CNC DU 6000
  • Control Unit - CNC DNC 880S - 2D Colour Graphic
  • Control Unit - CNC DELEM DA 56 - 2D Colour Graphic
  • CE with Manual F.AKAS II M -FPSC-B-C + Safety covers with switch
  • CE with SICK C 4000- only for tandem + steel protection covers
  • DFS1 Laser Finger protection (for Bottom Beam-Non CE)
  • Top tool European (One of them is segmented)
  • Bottom tool European (One of them is segmented)
  • Bottom tool Durma
  • Quick Release Clamping
  • Manual Crowning
  • CNC controlled motorized Crowning
  • Back gauge 1000 mm - Back protection with Light barrier
  • Oil Coolant
  • Additional Finger blocks & Sliding front arms

CNC Control Unit

  Durma CNC Easy Bend  - More effective and basic control than conventional press brakes - 5 minutes training time - More productive than conventional press brakes - More profitible than conventional press brakes - Less maintainence than conventional press brakes - Simplified screen with less keys - Easy to operate - No program required - Easy to follow bending steps  - Punch and Die in memory - Correction possibility - USB interface - Easy upgrade possibility to programmable CNC Advantage control unit

Durma CNC Easy Bend
- More effective and basic control than conventional press brakes
- 5 minutes training time
- More productive than conventional press brakes
- More profitible than conventional press brakes
- Less maintainence than conventional press brakes
- Simplified screen with less keys
- Easy to operate
- No program required
- Easy to follow bending steps
- Punch and Die in memory
- Correction possibility
- USB interface
- Easy upgrade possibility to programmable CNC Advantage control unit

  Durma Easy Advantage  - 2D graphic display  (7,4” ) &  work piece in programming page - Easy bend function - Automatic bending sequence - Part calculation - Safety guard PLC communication Offline software (programming and edit features) - Motorized crowning - Diagnose of I/O - Tandem working - USB interface for backup and restore programs/tools/parameters Maintenance- free - 85 programs (up to 12 steps each program); 12x85 = 1020 step - 32 Punches & Dies - Programs, Punches, Dies and Parameters can be copied using USB - Disk or Off-Line software - Wide language options - Easy upgrade possibility to colour graphic control unit

Durma Easy Advantage
- 2D graphic display  (7,4” ) &  work piece in programming page
- Easy bend function
- Automatic bending sequence
- Part calculation
- Safety guard PLC communication
Offline software (programming and edit features)
- Motorized crowning
- Diagnose of I/O
- Tandem working
- USB interface for backup and restore programs/tools/parameters
Maintenance- free
- 85 programs (up to 12 steps each program); 12x85 = 1020 step
- 32 Punches & Dies
- Programs, Punches, Dies and Parameters can be copied using USB - Disk or Off-Line software
- Wide language options
- Easy upgrade possibility to colour graphic control unit

  DNC 880s CNC 2D  - The DNC 880S numerical control is intended specifically for sheet-metal bending. - According to the software installed, it will be used on synchronized or conventional press brakes with mechanical or hydraulic end stops. - The DNC 880S is a high performance, competitively priced product in a compact and slim design. - 10” TFT colour screen - Graphic 2D display and multi-simulation capability.  - Windows XPe for multitasking and file management . - Connection to external devices through USB port for software updating and data backup. - Over 20 languages available.

DNC 880s CNC 2D
- The DNC 880S numerical control is intended specifically for sheet-metal bending.
- According to the software installed, it will be used on synchronized or conventional press brakes with mechanical or hydraulic end stops.
- The DNC 880S is a high performance, competitively priced product in a compact and slim design.
- 10” TFT colour screen
- Graphic 2D display and multi-simulation capability. 
- Windows XPe for multitasking and file management .
- Connection to external devices through USB port for software updating and data backup.
- Over 20 languages available.

Machine Specs

Product VIDEO