AD-S Series

CNC Press brake 

Unlimited possibilities and features providing faster setup and part production. Large daylight opening and working areas.

Standard Features

  • Y1, Y2, X, R - 4-Axes
  • Control Unit - CNC Cybelec ModEva 10S 3D with PC 1200 3D SW or Delem 66T
  • CNC controlled motorized Crowning
  • CNC controlled Hyd-Mech Crowning (Standard ≥ 800 t)
  • European Clamping system (Standard ≤ 400 t)
  • DURMA Clamping system (Standard ≥ 600 t)
  • Sliding Front Arms with full length linear guide
  • Back gauge , Servo-motorised & Linear guide & Ball bearing system ( X- R )
  • Sliding sheet support Arms with T-Canal and Tilting stop
  • Protection covers
  • Special designed - worldclass hydraulics blocks & valves
  • Worldclass electronics system

Features

  Syncro Y1Y2 Axes & CNC Control  Motorized Crowning Independent left and right axes (Y1Y2) controlled by electronics servo valves & electronics linear position controllers. CNC controlled motorized crowning system homogenizes bending forces every points of the bending parts to acquire straights bents. The need for shimming is eliminated

Syncro Y1Y2 Axes & CNC Control Motorized Crowning
Independent left and right axes (Y1Y2) controlled by electronics servo valves & electronics linear position controllers. CNC controlled motorized crowning system homogenizes bending forces every points of the bending parts to acquire straights bents. The need for shimming is eliminated

  Sliding front arms  Quickset support arms are mounted on a linear quide way and ball bearing system that allows “finger tip” lateral adjustment of the front support arms. Vertically adjustment is also easily achieved   

Sliding front arms
Quickset support arms are mounted on a linear quide way and ball bearing system that allows “finger tip” lateral adjustment of the front support arms. Vertically adjustment is also easily achieved

 

  X-R Back gauge  Fingers` depth and height is calculated by CNC controller and executes high speed servo motors produced by Siemens. Retraction is also a standard feature to acquire accurate parts. Back gauge fingers are easily adjusted on linear guides by ball integrated motion system

X-R Back gauge
Fingers` depth and height is calculated by CNC controller and executes high speed servo motors produced by Siemens. Retraction is also a standard feature to acquire accurate parts. Back gauge fingers are easily adjusted on linear guides by ball integrated motion system

  High Stroke / Daylight / Throat = High working space  AD-S machines offers wide spaces for ease of operation also reduces cycle times

High Stroke / Daylight / Throat = High working space
AD-S machines offers wide spaces for ease of operation also reduces cycle times

Tool Systems

  Eurostyle clampin  g  Eurostyle tool holders offers precise tool setup by their ground surfaces

Eurostyle clamping
Eurostyle tool holders offers precise tool setup by their ground surfaces

  Hydrulic new standard clamping

Hydrulic new standard clamping

   Eurostyle clamping    

 Eurostyle clamping

 

  Durma tool clamping

Durma tool clamping

  Quick release clamping    

Quick release clamping

 

  Durma hydraulic clamping

Durma hydraulic clamping

  Hydraulic eurostyle clamping

Hydraulic eurostyle clamping

Optional Features

  • CE with FIESSLER AKAS-LC II F manual + AKFR control box
  • CE with FIESSLER AKAS-LC II AKAS-3 M Motorised + FPSC (SAFETY PLC)
  • CE with SICK C 4000- only for tandem
  • DFS1 Laser Finger protection ( for Bottom Beam-Non CE )
  • Z1, Z2 Axes
  • X1, X2 Axes
  • R1, R2 Axes
  • R1 R2 axes on the finger blocks
  • Delta X axis ,+250mm stroke
  • X Axis =1000 mm - Back protection with Light barrier
  • X1 X2 Axes = 1250 mm - for lighting pole
  • X1 X2 Axes = 1250 mm - for lighting pole - pneumatic pushers
  • AP3-AP4 Sheet follower with sliding guide- Motorised height adj
  • F1-F2 Front feeding system with supports
  • F1-F2 Front feeding system with supports - pneumatic pushers
  • Quick Release Clamping
  • Durma Hydraulic or Mechanical Clamping
  • Wila Hydraulic or Mechanical Clamping
  • Tool options ( Durma, European, Wila ) in tool catalog
  • Bottom tool separation system
  • Crowning Vertical

BACK GAUGE OPTIONS

  X, R, Z1, Z2 4 Axes

X, R, Z1, Z2 4 Axes

  X1, X2, R, Z1, Z2, 5 Axes

X1, X2, R, Z1, Z2, 5 Axes

  X1, X2, R1, R2, Z1, Z2, 6 Axes

X1, X2, R1, R2, Z1, Z2, 6 Axes

  Delta X

Delta X

BACK GAUGE FINGERS

 
  3 Steps finger blocks

3 Steps finger blocks

  Special fingers

Special fingers

 

BOTTOM TOOL POSITIONING SYSTEMS

  Laser angle measurement system  Manufacturing sheet metal parts with properly bending angles that are kept constant all times often meets a problem during the actual production process: different parameters in material  thickness and stresses. The best solution is laser based bending angle measuring device.   Any bending angle can be measured Very compact, everything in the appliance Light influence, light or dark material surfaces play practically no part at all

Laser angle measurement system
Manufacturing sheet metal parts with properly bending angles that are kept constant all times often meets a problem during the actual production process: different parameters in material  thickness and stresses. The best solution is laser based bending angle measuring device. 

Any bending angle can be measured
Very compact, everything in the appliance
Light influence, light or dark material surfaces play practically no part at all

  Pneumatic positioning system

Pneumatic positioning system

  Motorized positioning system

Motorized positioning system

CNC Control Unit

  ModEva 10S 3D & Pc 1200 3D S W  ModEva is a range of numerical controls adapted to the actual market demand. Therefore the complete ModEva serie runs now under Windows ModEva can provide a calculating capacity and performance adapted to simple machinery with a 3D graphic display, it can also be transformed into a real workstation with a very high-power CPU and maximum graphic capabilities thus making Cybelec ® adapted numerical control available to the most sophisticated machinery.  All ModEvaTM consoles are equipped with the new Quick CursorTM device. One of its main features is the possibilty of completely programming a part on a single page. When producing more complex parts, the graphic sequences generated by a CAD/CAM system can easily be viewed on the user console.  All ModEva come with PC 1200 off line bending software. PC 1200 program allows you to prepare your programs, calculate offers and check feasibility of the parts in your Office on a PC. No time waisted on the machine.  3D / 10,4” color screen  TFT type screen  128 Mb Ram  128 DM Main Memory Easy Cursor Automatic Bend Sequences PC Off line 3D Software

ModEva 10S 3D & Pc 1200 3D S W
ModEva is a range of numerical controls adapted to the actual market demand. Therefore the complete ModEva serie runs now under Windows ModEva can provide a calculating capacity and performance adapted to simple machinery with a 3D graphic display, it can also be transformed into a real workstation with a very high-power CPU and maximum graphic capabilities thus making Cybelec ® adapted numerical control available to the most sophisticated machinery.

All ModEvaTM consoles are equipped with the new Quick CursorTM device. One of its main features is the possibilty of completely programming a part on a single page. When producing more complex parts, the graphic sequences generated by a CAD/CAM system can easily be viewed on the user console.

All ModEva come with PC 1200 off line bending software. PC 1200 program allows you to prepare your programs, calculate offers and check feasibility of the parts in your Office on a PC. No time waisted on the machine.

3D / 10,4” color screen
TFT type screen
128 Mb Ram
128 DM Main Memory
Easy Cursor
Automatic Bend Sequences
PC Off line 3D Software

  ModEva RA  3D / 15” color screen  TFT type screen  128 Mb 256/512 Ram 20 GB Main Memory Easy Cursor Automatic Bend Sequences PC Off line 3D Software

ModEva RA
3D / 15” color screen
TFT type screen
128 Mb 256/512 Ram
20 GB Main Memory
Easy Cursor
Automatic Bend Sequences
PC Off line 3D Software

  Delem DA 66T  The DA-66T is the Delem modular press brake controller. All graphics, including product and machine as well as tool setup are also available in 3D. This to visualize the machine situation as accurate as possible. The DA-66W can program 2D products, accurately showing and calculating including sheet thickness and radii. During programming automatically generation of bend sequencers can be used as well as manual selection. The operator can overrule to his own choice. With the DA-66W also special tools for e.g. hemming bends can be programmed. The DA-66W helps the user in programming these bends (with their specific parameters) and also shows the prebend as well as the hemming operation during production.

Delem DA 66T
The DA-66T is the Delem modular press brake controller. All graphics, including product and machine as well as tool setup are also available in 3D. This to visualize the machine situation as accurate as possible. The DA-66W can program 2D products, accurately showing and calculating including sheet thickness and radii. During programming automatically generation of bend sequencers can be used as well as manual selection. The operator can overrule to his own choice. With the DA-66W also special tools for e.g. hemming bends can be programmed. The DA-66W helps the user in programming these bends (with their specific parameters) and also shows the prebend as well as the hemming operation during production.

  Delem DA 69T  The DA-69T is 1:1 compatible with the DA-66W and offers next to 2D products also 3D products. 3D products can be programmed with accurate sheet thickness and desired radii. Automatical bend sequence calculation can help finding the optimum bend sequence even from very complex products. Multiple products can programmed in 3D, 2D as well as numerical. Storage is managed on the CF-harddrive. The controllers Windows operating system enabled easy integration in factory networks and due to the real-time capable OS, also instant switch of is possible. The controller will start-up time after time, without annoying booting messages. The DA-66W and DA-69W can also be equipped with an optional touch screen.

Delem DA 69T
The DA-69T is 1:1 compatible with the DA-66W and offers next to 2D products also 3D products. 3D products can be programmed with accurate sheet thickness and desired radii. Automatical bend sequence calculation can help finding the optimum bend sequence even from very complex products. Multiple products can programmed in 3D, 2D as well as numerical. Storage is managed on the CF-harddrive. The controllers Windows operating system enabled easy integration in factory networks and due to the real-time capable OS, also instant switch of is possible. The controller will start-up time after time, without annoying booting messages. The DA-66W and DA-69W can also be equipped with an optional touch screen.

Machine Specs

PRODUCT VIDEO