dcb-m 560

double column bandsaw

Double Column Semi Automatic Bandsawing Machine with Mitre Table

 

Standard Features

  • Motorized Roller Feeding
  • ƒTop Clamping - Mechanical
  • ƒLength Adjustment - Electrical
  • ƒChip Brush
  • ƒPart Counter
  • ƒ47” Roller Table
  • One-Way 60° Adjustable Turn Table Base
  • ƒHydraulic Vice
  • ƒElectronic Variable Cutting Speed Adjustment with Inverter
  • ƒBimetal Bandsaw and Cooling System
  • ƒBlade Tensioning - Hydro Mechanical
  • ƒBearing and Carbide Tape Blade Housing
  • ƒCutting Height Adjustment

Features

  Mitre Cutting  The bow can be manually swivelled to the left up to 60o (beyond mitre)        

Mitre Cutting
The bow can be manually swivelled to the left up to 60o (beyond mitre)
 

 

 

  Blade Tensioning-Hydro mechanic (THM)  As standard the blade tension is through the manual wind hydro-mechanical system.  A gauge is provided to show blade tension pressure.  In the event of blade breakage the machine automatically stops

Blade Tensioning-Hydro mechanic (THM)
As standard the blade tension is through the manual wind hydro-mechanical system.  A gauge is provided to show blade tension pressure.  In the event of blade breakage the machine automatically stops

  Hydraulic Vice  Rigidity is one of the most important factors for cutting quality and longer blade life.  If the material moves, blade breakage would be inevitable.  All DURMA bandsaws come standard with a hydraulic vice. 

Hydraulic Vice
Rigidity is one of the most important factors for cutting quality and longer blade life.  If the material moves, blade breakage would be inevitable.  All DURMA bandsaws come standard with a hydraulic vice. 

  Bearing and Carbide Type Blade Housing (BH)  The blade guides are critical to keep the blade straight and the cut square.  DURMA has carbide inserts on each side of the blade to square it after coming of the pulleys plus a vertical bearing running along the back of the blade to absorb the thrust of cutting.    

Bearing and Carbide Type Blade Housing (BH)
The blade guides are critical to keep the blade straight and the cut square.  DURMA has carbide inserts on each side of the blade to square it after coming of the pulleys plus a vertical bearing running along the back of the blade to absorb the thrust of cutting. 

 

  Variable Control of Band Speed  It is very import that the band speed is appropriate to cut different material hardness.   All DURMA bandsaws come standard with variable speed control.  Simply use the up arrow to increase band speed and the down arrow to decrease speed.  With a DURMA machine there is no need to change V belt pulleys.        

Variable Control of Band Speed
It is very import that the band speed is appropriate to cut different material hardness.   All DURMA bandsaws come standard with variable speed control.  Simply use the up arrow to increase band speed and the down arrow to decrease speed.  With a DURMA machine there is no need to change V belt pulleys.  

 

 

  Cutting Height Adjustment (CHA)  A simple but effective way to increase productivity when performing multiple cuts is to set the bow lift height just enough for the work to pass through.  It does not get any simpler than lowering the collar down the column.

Cutting Height Adjustment (CHA)
A simple but effective way to increase productivity when performing multiple cuts is to set the bow lift height just enough for the work to pass through.  It does not get any simpler than lowering the collar down the column.

  Bimetal Bandsaw blade and Cooling System   As standard, one bi-metal blade is supplied suitable for general purpose cutting.  Water based coolant is delivered with desired flow to the band and the cutting area via a strong centrifugal pump.  The machine is dispatched without coolant oil.   

Bimetal Bandsaw blade and Cooling System 
As standard, one bi-metal blade is supplied suitable for general purpose cutting.  Water based coolant is delivered with desired flow to the band and the cutting area via a strong centrifugal pump.  The machine is dispatched without coolant oil.

 

  Chip Brush (CB)  The manual chip bush cleans most of the swarf from the blade and prevents the build up of swarf on undesirable areas of the saw

Chip Brush (CB)
The manual chip bush cleans most of the swarf from the blade and prevents the build up of swarf on undesirable areas of the saw

  Roller Material Table L=1200mm (RT1200)  As standard the saw is supplied with a 1200mm heavy duty roller table.  Extra tables can be purchased for either the in-feed or out-feed side of the saw.    

Roller Material Table L=1200mm (RT1200)
As standard the saw is supplied with a 1200mm heavy duty roller table.  Extra tables can be purchased for either the in-feed or out-feed side of the saw. 

 

 
 
 

Optional Features

  • Motorized Chip Brush
  • ƒChip Conveyor
  • ƒBlade Tensioning - Hydraulic
  • ƒLaser Marking System
  • ƒTop Clamping - Hydraulic
     
  • ƒ NC Control System
  • ƒ Micro-spray Cooling System
  • ƒ Automatic Cutting Pressure Control
  • ƒ Extra 47” Roller Table
  • ƒ Motorized 118” Roller Table
  Motorized Chip-Brush (CBM)  A motorised chip brush achieves better cleaning of the blade             

Motorized Chip-Brush (CBM)
A motorised chip brush achieves better cleaning of the blade 

 

 

 

 

  Top Clamping –Hydraulic (TCH)  A strongly recommended option if you wish to bundle (gang) cut.  The overhead hydraulic clamp provides added support to the bundle thus prevent material movement which results in immediate blade breakage.

Top Clamping –Hydraulic (TCH)
A strongly recommended option if you wish to bundle (gang) cut.  The overhead hydraulic clamp provides added support to the bundle thus prevent material movement which results in immediate blade breakage.

  Motorised Feed Table  L = 3000mm  A 3 metre section of motorised feed tables. Suitable for on the in-feed side of the saw.  Controlled via the main console 

Motorised Feed Table L = 3000mm
A 3 metre section of motorised feed tables. Suitable for on the in-feed side of the saw.  Controlled via the main console 

  Chip Conveyor (CC)  If you want to achieve the most productivity out of your saw then this relatively inexpensive option minimise clean down time and keeps your saw in production for longer.  You will really notice the benefit when cutting a lot of solid material which produces large amounts of swarf.

Chip Conveyor (CC)
If you want to achieve the most productivity out of your saw then this relatively inexpensive option minimise clean down time and keeps your saw in production for longer.  You will really notice the benefit when cutting a lot of solid material which produces large amounts of swarf.

  Micro Spray Cooling Systems (MC)  A spray of cutting oil is used on the blade instead of flood water based coolant.  More ecological friendly and minimise coolant usage and expense.        

Micro Spray Cooling Systems (MC)
A spray of cutting oil is used on the blade instead of flood water based coolant.  More ecological friendly and minimise coolant usage and expense.        

  Blade Tensioning- Hydraulic (TH)  Operated via the control panel the hydraulic blade tensioning option requires no manual intervention.  The hydraulic system is set to the correct pressure so no chance of over tensioning.  It is a quick and easy way to relax the tension on the blade over night.   This will increase blade life.  If the blade breaks the system will stop the saw. 

Blade Tensioning- Hydraulic (TH)
Operated via the control panel the hydraulic blade tensioning option requires no manual intervention.  The hydraulic system is set to the correct pressure so no chance of over tensioning.  It is a quick and easy way to relax the tension on the blade over night.   This will increase blade life.  If the blade breaks the system will stop the saw. 

  Automatic Cutting Pressure Control (ACP)  A highly recommended option if cutting structural steel or hollow sections.  The profile of these sections makes the blade have periods of heavy load and periods with little load during the cut.  This option automatically obtains the desired cutting pressure.      

Automatic Cutting Pressure Control (ACP)
A highly recommended option if cutting structural steel or hollow sections.  The profile of these sections makes the blade have periods of heavy load and periods with little load during the cut.  This option automatically obtains the desired cutting pressure.   

 

  Laser Marking System (LM)  An awesome feature to have especially if cutting a lot of one off pieces at different lengths.  Also makes setting angle cuts much easier.  There is no need to lower the blade just above the work to set the cut length thus dramatically prevents accidents of lowering the blade into the material cause expensive blade breakages.   

Laser Marking System (LM)
An awesome feature to have especially if cutting a lot of one off pieces at different lengths.  Also makes setting angle cuts much easier.  There is no need to lower the blade just above the work to set the cut length thus dramatically prevents accidents of lowering the blade into the material cause expensive blade breakages.

 

  Extra Roller Material Table  L=1200mm (RT1200) Suitable for on the in-feed or out-feed side of the saw

Extra Roller Material Table L=1200mm (RT1200)
Suitable for on the in-feed or out-feed side of the saw

Machine Specs