GS 200L & GS 250L
CNC Lathes
The GS-L Series has all the features of the GS but with a longer turning length.
Standard Features
- Coolant through turret
- Work lighting
- Foot switch
- Tool bag, operation manuals
- Colour LCD
- 3 Jaw Chuck/one set of soft jaws
- Bar feeder interface
- 3 additional spare M code
Features
Machine Base
- High-quality cast iron base integrated structure contributes overall stability, rigidity and durability of the machine.
- Strategically-ribbed, one body 30 degree slant bed design
Spindle Design
Higher Axial and Radial Stiffness
- Higher axial and radial stiffness is achieved by the Hardinge 4 BEARING spindle.
- 2 x 40 degree angular contact bearings to absorb huge thrust
- 2 x roller bearing to keep the spindle running true and eliminate spindle whip
Minimise Maintenance
- Central re-grease lubrication
Unit (Manual type)
Rigid Construction
-Heavy duty X-and Z-axis roller type linear guideways feature maximum static and dynamic stiffness for longer machine life.
- C2 class X axis ball screw, pre-tensioned, with double nut, hardened and ground for low noise and low thermal displacement.
- Z axis pre-tensioned ball screw reduces temperature increase during traverse.
- All servo motors are directly coupled to the ball screws. This provides direct drive positive and accurate movement of the carriage.
Excellent Accuracy
- Accuracy in accordance to the International Organisation for Standards protocol ISO 230-2
- Full stroke positioning 0.01mm
- Full stroke repeatability 0.005mm
- Actual machining results - Roundness 0.7 µM, Surface finish Ra0.2 µM
Headstock Design
- Special headstock design eliminates thermal displacement and assures continuous machining accuracy
12 Station Tool Turret
- 12 station tool turret for 25mm square shank or 40mm round shank tooling
- Bidirectional indexing allows shortest path for reduced non-cut time.
- Positive hydraulic clamping.
Rigid Tapping – Standard
- Synchronization between the main spindle and the Z axis motion provides precise and fast rigid tapping operation.
High Efficiency Main Spindle
- High Winding - 26kW with 386N/m of torque
- Low winding – 18.5kW with 605N/m of torque
Fanuc OiTD control system
- Max. machine controlled axes: 4
- Max. Simultaneously controlled axes: 3
- 32 bit 8.4” Colour TFT LCD Display
- Front mounted ATA flash memory card slot
- Part Program Storage: 512KB (1280 metres)
Optional Features
Collet adaption chuck
2-speed range spindle
Fully programmable tail stock
Part catcher
Arm type
Part conveyor
Chip conveyor
Tool setter probe
Part probe
Oil mist collector
Bar feeder
High pressure coolant through turret
Live centre
Stack light
Auto door
Live tooling and C axis - 12 stations live tooling
Fully Programmable Hydraulic Tailstock
- # 5 Morse Taper Tailstock with 1075mm of Travel. 20mm quill movement.
- Max. part length 1012.5mm or (992.5mm with quill extended)
- Min part length 20mm or (0mm with quill extended)
- Rapid traverse speed 5.5 m/min
Live Centre
- High quality live centre suitable for high speed machining
Part Catcher
- Arm type
- With part conveyor
- Left side discharge
- Max part diameter 65mm
- Max part length 160mm
Tool Turret Upgrades
Live Tooling – VDI 40 (Duplomatic)
- 12 station standard
- 8 kW
- 35 Nm torque
- 4,000 rpm
- Live tooling & C-axis
- Index time 0.52 seconds
- Rotation time .06 Sec.
Automation Options
Renishaw tool probe
- Programmable - Automatic / Manual operation
Auto door
- Suitable for productivity
- The door opens automatically at the end of the machining cycle and closes by pressing on two push buttons to ensure operator safety
- Auto power off
Tool Turrent Upgrades Live Tooling – BMT 65 (Duplomatic)
- 12 station standard
- 4.9 kW
- 27Nm torque
- 4,000 rpm
- Live tooling & C-axis
- Index time 0.52 seconds
- Rotation time .06 Sec.
Bar Loader Options
Short bar loader
- Bar diameter 5 to 65mm
- Maximum bar length 1250mm
- Must be supported in the headstock
Long bar loader
- Bar diameter 5 to 42mm
- Maximum bar length 3200mm
- Bar capacity diameter 10mm x 28pcs
High pressure coolant
- Through tool turret
- Pressure up to 20 bar
- NOTE 2.8 bar is standard
Mist collector:
- Efficiently filter
- Eliminates oil mist
- Dry smoke from machine
- Enclosure
Swarf Management
Chip Conveyor
Hinge type: For long and scroll chips
Chip Conveyor
Scraper type: For short and fine chip
Steady Rest
- Manufactured by AUTOBLOK-SLU-M2
- Self Centring Work System;
- Centring range from 8 to 101mm
- With Draulic power driven centring and manual movement.
Machine Specs
