GS 150MS & GS 200MS

Multi axis cnc lathes

Standard Features

  • 2500 rpm gear head
  • Operation finish lamp
  • Air blast through spindle
  • Remote manual pulse generator
  • Centralized automatic lubrication system
  • Convection heat exchanger in control box
  • Link type chip conveyor
  • B axis 0.001 degree
  • NC rotary table
  • Fluorescent light
  • RS-232 interface
  • Spindle oil cooler
  • Oil fluid separator
  • Arm type ATC (40T)
  • Automatic power off

Features

  Swarf Management  - Chip Conveyor - included. Hinge type along back of table.  - Chip Barrow - included            

Swarf Management
- Chip Conveyor - included. Hinge type along back of table.

- Chip Barrow - included

 

 

 

 

  HARTFORD Built Spindle   - HARTFORD built BT 50 spindle  - 2,500 rpm  - 4 step gear box - True Gear transmission 

HARTFORD Built Spindle
- HARTFORD built BT 50 spindle
- 2,500 rpm
- 4 step gear box
- True Gear transmission 

  40 Tool Automatic Tool Changer  Standard is the swing arm type 40 tool automatic tool changer. - Max. tool diameter is 125mm - Max. tool (adjacent empty) 250mm - Max. tool length is 400mm - Max. tool weight is 25kg      

40 Tool Automatic Tool Changer
Standard is the swing arm type 40 tool automatic tool changer.
- Max. tool diameter is 125mm
- Max. tool (adjacent empty) 250mm
- Max. tool length is 400mm
- Max. tool weight is 25kg

 

 

  Tool Probe & Part Probe  - Part Measuring Probe - RMP40  - Tool Measuring Probe - TS27R

Tool Probe & Part Probe
- Part Measuring Probe - RMP40
- Tool Measuring Probe - TS27R

  Rigid BOX WAY Construction             

Rigid BOX WAY Construction

 

 

 

 

  Patent Pending W-Axis Design   W-Axis is supports by two linear guide ways for superior rigidity.  The HARTFORD Patent Pending W-Axis design allows a massive 700mm W-Axis travel.

Patent Pending W-Axis Design
W-Axis is supports by two linear guide ways for superior rigidity.  The HARTFORD Patent Pending W-Axis design allows a massive 700mm W-Axis travel.

  Spindle Chiller   - A spindle oil chiller is standard equipment. 

Spindle Chiller
- A spindle oil chiller is standard equipment. 

   Y-Axis Compensation   Due to gravity while machining with a heavy tool and the W-Axis extended a long way slight deflection will be present.  HARTFORD tackles this problem by offering Y axis software compensation to ensure high machining accuracy. 

 Y-Axis Compensation
Due to gravity while machining with a heavy tool and the W-Axis extended a long way slight deflection will be present.  HARTFORD tackles this problem by offering Y axis software compensation to ensure high machining accuracy. 

  Convenient Multi Function MPG   With these extremely large machines often when setting up a large workpiece the operator is far away from the controller screen.  The solution: HARTFORD offers a multi functional mpg so the operator can.  - Display the coordinates of the axis - Manual stop/stop spindle rotation - Jog axis movement control

Convenient Multi Function MPG
With these extremely large machines often when setting up a large workpiece the operator is far away from the controller screen.  The solution: HARTFORD offers a multi functional mpg so the operator can. 
- Display the coordinates of the axis
- Manual stop/stop spindle rotation
- Jog axis movement control

  Heidenhain Linear Scales   For superior accuracy HARTFORD offer linear feedback scales on X, Y & Z Axis.  Furthermore HARTFORD offer feedback scales on the B-Axis to ensure superior table rotation accuracy.   

Heidenhain Linear Scales
For superior accuracy HARTFORD offer linear feedback scales on X, Y & Z Axis.  Furthermore HARTFORD offer feedback scales on the B-Axis to ensure superior table rotation accuracy.

 

  B-Axis Rotary Table   - Working Surface 1600 x 1800mm   - Max. table load 12,000kg - Min. indexing 0.001 degrees - Max. speed 2rpm

B-Axis Rotary Table
- Working Surface 1600 x 1800mm  
- Max. table load 12,000kg
- Min. indexing 0.001 degrees
- Max. speed 2rpm

  Fanuc OiMD control system  - 32 bit 10.4” Colour TFT LCD Display  - Manual guide i - Front mounted ATA flash memory card slot  - Part Program Storage 512KB (1280 metres) - Embedded Ethernet connection - Fanuc Function: AI Contour Control-- I,  - Preread ahead 40 Blocks;    FEATURING HARTROL – Exclusive to Hartford

Fanuc OiMD control system
- 32 bit 10.4” Colour TFT LCD Display
- Manual guide i
- Front mounted ATA flash memory card slot
- Part Program Storage 512KB (1280 metres)
- Embedded Ethernet connection
- Fanuc Function: AI Contour Control-- I, 
- Preread ahead 40 Blocks; 

 FEATURING HARTROL – Exclusive to Hartford

Optional Features

  • Multiangular milling head
  • 90 degree head
  • 90 degree extension head
  • Quill support
  • Fluid coolant system
  • Coolant through spindle
  • CTS full splash guard
  • Full splash guard
  • Portable chip bucket
  • Oil mist collector system
  • Table side air blast (1 tube)
  • Auto tool length measurement
  • Foot switch for spindle clamp/unclamp
  • Closed loop linear scale positioning system
  • Air gun
  Control Upgrades  Fanuc Function: AI, Contour Control-- II, Preread ahead 200 Blocks;  - Fanuc Function: Data server, 1 gig of memory;                                            - NANO smoothing: (Includes Contour control II - Polar coordinate;command (J818)  - Automatic Power Off        

Control Upgrades
Fanuc Function: AI, Contour Control-- II, Preread ahead 200 Blocks; 
- Fanuc Function: Data server, 1 gig of memory;                                           
- NANO smoothing: (Includes Contour control II
- Polar coordinate;command (J818) 
- Automatic Power Off     

 

  90 Degree Extension Head  Spindle Taper: #50 - Max. tool diameter: 150mm - Tool picking: manual - Max. power: 38 kW  - Max. speed: 1000 rpm - Indexing method: manual

90 Degree Extension Head
Spindle Taper: #50
- Max. tool diameter: 150mm
- Tool picking: manual
- Max. power: 38 kW
- Max. speed: 1000 rpm
- Indexing method: manual

  Tool Automatic Tool Changer  UPGRADE to the swing arm type 60 tool automatic tool changer - Max. tool diameter is 125mm - Max. tool (adjacent empty) 250mm - Max. tool length is 400mm - Max. tool weight is 25kg

Tool Automatic Tool Changer
UPGRADE to the swing arm type 60 tool automatic tool changer
- Max. tool diameter is 125mm
- Max. tool (adjacent empty) 250mm
- Max. tool length is 400mm
- Max. tool weight is 25kg

  Quill Supports  Max. speed: 1500 rpm - 300mm Long         - 500mm Long         

Quill Supports
Max. speed: 1500 rpm
- 300mm Long        
- 500mm Long         

  Semi  Enclosed Guarding   As pictured: Fully Enclosed Guarding  Guarding only, still has standard coolant system with mist collector Fully Enclosed Guarding with Through Spindle Coolant This option also includes through spindle coolant at 20 bar with mist collector   

Semi  Enclosed Guarding
As pictured: Fully Enclosed Guarding
Guarding only, still has standard coolant system with mist collector
Fully Enclosed Guarding with Through Spindle Coolant
This option also includes through spindle coolant at 20 bar with mist collector

 

  Universal Head  Spindle Taper: #50 - Max. tool diameter: 200mm - Tool picking: manual - Max. power: 55 kW  - Max. speed: 1000 rpm - Indexing method: manual  

Universal Head
Spindle Taper: #50
- Max. tool diameter: 200mm
- Tool picking: manual
- Max. power: 55 kW
- Max. speed: 1000 rpm
- Indexing method: manual  

Machine Specs