hcmc series

bt40 box way

Vertical Machining Centre

The new "solid as a rock" structure of the HCMC series delivers exceptional cutting performance with enhanced surface finish, whether you are heavy cutting or fine finishing.

Standard Features

  • Leveling bolts and blocks
  • Remote manual pulse generator
  • Convection heat exchanger in control
  • Auto power off
  • Operation finish lamp
  • RS-232 interface
  • Tool package
  • Suspension operator box
  • Coolant jets around spindle
  • Full enclosed splash guard
  • Cooling system
  • Centralized automatic lubrication system
  • Oil fluid separator
  • Two side chip of the chassis (screw type)
  • Coolant tank (with chip bucket)
  • Operational manual & electric drawing equipment
  • Fluorescent lamp x 1
  • Air blast through spindle

 

Features

  Fanuc OiMF Control System  - 32 bit 10.4” Colour TFT LCD Display  - Front mounted ATA flash memory card slot  - Part Program Storage 512KB (1280 metres) - Embedded Ethernet connection Fanuc    HARTFORD DUAL SCREEN     Hartford, Taiwan’s biggest Machining Centre manufacturer, has introduced the ground breaking dual screen interface.  Available for Fanuc and Mitsubishi controllers.  The touch screen interface puts all the key functions e.g. feedhold, coolant on/off etc….at your fingertips. The graphical workpiece calibration interface makes set up an absolute breeze.  Saving you time and money.    It’s a game changer!

Fanuc OiMF Control System
- 32 bit 10.4” Colour TFT LCD Display
- Front mounted ATA flash memory card slot
- Part Program Storage 512KB (1280 metres)
- Embedded Ethernet connection Fanuc 

HARTFORD DUAL SCREEN   
Hartford, Taiwan’s biggest Machining Centre manufacturer, has introduced the ground breaking dual screen interface.  Available for Fanuc and Mitsubishi controllers.  The touch screen interface puts all the key functions e.g. feedhold, coolant on/off etc….at your fingertips. The graphical workpiece calibration interface makes set up an absolute breeze.  Saving you time and money. 

It’s a game changer!

  24 Tool Automatic Tool Changer  Standard is the swing arm type 24 tool automatic tool changer. - Max. tool diameter is 75mm - Max. tool length is 300mm - Max. tool weight is 6kg   

24 Tool Automatic Tool Changer
Standard is the swing arm type 24 tool automatic tool changer.
- Max. tool diameter is 75mm
- Max. tool length is 300mm
- Max. tool weight is 6kg

 

  Box Way Construction  - Rigid wide stance column. - The head wraps around the column ways for extreme rigidly.  - 4-ways in Y axis increases flat surface contact area for extreme rigidity - Table and saddle wrap around the box ways - 650mm Y axis travel

Box Way Construction
- Rigid wide stance column.
- The head wraps around the column ways for extreme rigidly. 
- 4-ways in Y axis increases flat surface contact area for extreme rigidity
- Table and saddle wrap around the box ways
- 650mm Y axis travel

  Swarf Management  - Chink link chip conveyor, Includes swarf barrow - Coolant chip flush        - Coolant Wash Gun       - Air Gun      

Swarf Management
- Chink link chip conveyor, Includes swarf barrow
- Coolant chip flush       
- Coolant Wash Gun      
- Air Gun   

 

  Spindle Chiller   A spindle oil chiller

Spindle Chiller
A spindle oil chiller

  Coolant Through Spindle   Option 20 bar (280 PSI) included      

Coolant Through Spindle
Option 20 bar (280 PSI) included

 

 

  HARTFORD Built Spindle   The HARTFORD HCMC spindle headstock design (pictured left) sees the casting of the headstock enlarged to encase the spindle.  This significantly increases spindle rigidity.  - 15kW Spindle Motor Rating (S3 25%)  - 11kW Spindle Motor Rating 30 mins   - 7.5kW Spindle Motor Rating continuous

HARTFORD Built Spindle
The HARTFORD HCMC spindle headstock design (pictured left) sees the casting of the headstock enlarged to encase the spindle.  This significantly increases spindle rigidity.

- 15kW Spindle Motor Rating (S3 25%) 
- 11kW Spindle Motor Rating 30 mins  
- 7.5kW Spindle Motor Rating continuous

Optional Features

  • Coolant through spindle 20 bar without water cart
  • Coolant through spindle 20 bar with water cart
  • Coolant through spindle 25 bar with water cart
  • Coolant through spindle preparation only
  • Closed loop linear scale positioning system
  • Auto tool length and diameter measurement
  • Oil mist collector system
  • Auto tool length measurement 
  • Fluorescent lamp x 2
  • NC rotary table
  • DNC software
  • 90 degree angle head (tool type)
  • Link type chip conveyor
  • Portable chip bucket
  • Spindle oil cooler
  • Auto work piece measurement
  • Coolant flushing device
  • Water gun
  • Air gun
 
  CNC Rotary Table   - 255mm Diameter, Centre Height 185mm, Minimum Increment 0.001 Degrees  - Manual Tailstock for CNC, Rotary Table 255 mm

CNC Rotary Table 
- 255mm Diameter, Centre Height 185mm, Minimum Increment 0.001 Degrees

- Manual Tailstock for CNC, Rotary Table 255 mm

 

Machine Specs