HCMC Series

Bt 50 Box way

Vertical Machining Centre

The HCMC BT50 Box Way series delivers massive cutting versatility to your workshop. The standard geared headstock provides exceptional torque and incredible heavy cutting performance.

Tornado-HCMC-13.jpg

Standard Features

  • Remote manual pulse generator
  • Convection heat exchanger in control
  • Auto power off
  • Operation finish lamp
  • RS-232 interface
  • Tool package
  • Suspension operator box
  • Coolant jets around spindle
  • Full enclosed splash guard
  • Cooling system
  • Centralized automatic lubrication system
  • Oil fluid separator
  • Two side chip of the chassis (screw type)
  • Coolant tank (with chip bucket)
  • Operational manual & electric drawing equipment
  • Fluorescent lamp x 1
  • Air blast through spindle
  • Leveling bolts and blocks

Features

  24 Tool Automatic Tool Changer  Standard is the swing arm type 24 tool automatic tool changer.  - Max. tool diameter is 125mm - Max. tool length is 300mm - Max. tool weight is 15kg

24 Tool Automatic Tool Changer
Standard is the swing arm type 24 tool automatic tool changer.

- Max. tool diameter is 125mm
- Max. tool length is 300mm
- Max. tool weight is 15kg

  Spindle Chiller   - A spindle oil chiller is standard equipment

Spindle Chiller
- A spindle oil chiller is standard equipment

  Swarf Management  - Chip Conveyor - Hinge type - Coolant chip flush      - Coolant Wash Gun        - Air Gun        

Swarf Management
- Chip Conveyor - Hinge type
- Coolant chip flush     
- Coolant Wash Gun       
- Air Gun

      

  Coolant Through Spindle  Option 20 bar (280 PSI)

Coolant Through Spindle
Option 20 bar (280 PSI)

  Box Way Construction  - Rigid wide stance column. - The head wraps around the column ways for extreme rigidly.  - 4-ways in Y axis increases flat surface contact area for extreme rigidity - Table and saddle wrap around the box ways - 800mm Y axis travel

Box Way Construction
- Rigid wide stance column.
- The head wraps around the column ways for extreme rigidly. 
- 4-ways in Y axis increases flat surface contact area for extreme rigidity
- Table and saddle wrap around the box ways
- 800mm Y axis travel

  Fanuc OiMD control system  - 32 bit 10.4” Colour TFT LCD Display  - Manual guide i - Front mounted ATA flash memory card slot  - Part Program Storage 512KB (1280 metres) - Embedded Ethernet connection - Fanuc Function: AI Contour Control-- I, Preread ahead 40 Blocks

Fanuc OiMD control system
- 32 bit 10.4” Colour TFT LCD Display
- Manual guide i
- Front mounted ATA flash memory card slot
- Part Program Storage 512KB (1280 metres)
- Embedded Ethernet connection
- Fanuc Function: AI Contour Control-- I, Preread ahead 40 Blocks

Optional Features

  • Coolant through spindle 20 bar without water cart
  • Coolant through spindle 20 bar with water cart
  • Coolant through spindle 25 bar with water cart
  • Coolant through spindle preparation only
  • Closed loop linear scale positioning system
  • Auto tool length and diameter measurement
  • Oil mist collector system
  • Auto tool length measurement 
  • Fluorescent lamp x 2
  • NC rotary table
  • DNC software
  • 90 degree angle head (tool type)
  • Link type chip conveyor
  • Portable chip bucket
  • Spindle oil cooler
  • Auto work piece measurement
  • Coolant flushing device
  • Water gun
  • Air gun
  CNC Rotary Table   - 320mm Diameter - 4th axis rotary table(DR320): 4th axis preparation, (AMP + motor + cable), Hydraulic clamp unit, INCLUDES 4th AXIS DRIVE PACKAGE  - Manual Tailstock for CNC, Rotary Table 320 mm

CNC Rotary Table 
- 320mm Diameter - 4th axis rotary table(DR320): 4th axis preparation, (AMP + motor + cable), Hydraulic clamp unit, INCLUDES 4th AXIS DRIVE PACKAGE

- Manual Tailstock for CNC, Rotary Table 320 mm

  Controller Upgrades  - Fanuc Function: AI, Contour Control-- II, Preread ahead 200 Blocks;   - Fanuc Function: Data server,1 gig of memory;                                                - NANO smoothing (Includes Contour control II)  - Polar coordinate, command (J818)   -Automatic Power Off, Included

Controller Upgrades
- Fanuc Function: AI, Contour Control-- II, Preread ahead 200 Blocks; 

- Fanuc Function: Data server,1 gig of memory; 
                                             
- NANO smoothing (Includes Contour control II)

- Polar coordinate, command (J818) 

-Automatic Power Off, Included

  Spindle Upgrades  - 8,000 rpm  26kW, INCLUDING chiller, Direct drive transmission, with ZF gearbox  - 10,000 rpm  26kW, INCLUDING chiller, Direct Coupled, No Through Spindle Coolant 

Spindle Upgrades
- 8,000 rpm  26kW, INCLUDING chiller, Direct drive transmission, with ZF gearbox

- 10,000 rpm  26kW, INCLUDING chiller, Direct Coupled, No Through Spindle Coolant 

  Tool Probe & Part Probe  Tool Measuring Probe - TS27R

Tool Probe & Part Probe
Tool Measuring Probe - TS27R

Machine Specs