Pro series - box way BT40

Vertical Machining Centre

The Pro Series is a compactly constructed power house that combines greater cutting capabilities with critical accuracy.  High quality, high performance open fronted vertical machining centre with hardened & ground box guideways & geared headstock options.

Standard Features

  • Full splash guard
  • Cooling system
  • Automatic lubrication system
  • Work lamp
  • Air blast through spindle
  • Leveling bolts and blocks
  • Convention heat exchanger in control box
  • Automatic power off
  • Operation finish lamp
  • Operation manual and electric drawing equipment
  • Coolant jets around spindle
  • Spindle air curtain

Features

  Fanuc OiMF Control System  - 32 bit 10.4” Colour TFT LCD Display  - Manual guide i - Front mounted ATA flash memory card slot  - Part Program Storage 512KB (1280 metres) - Embedded Ethernet connection     HARTFORD DUAL SCREEN     Hartford, Taiwan’s biggest Machining Centre manufacturer, has introduced the ground breaking dual screen interface.  Available for Fanuc and Mitsubishi controllers.  The touch screen interface puts all the key functions e.g. feedhold, coolant on/off etc...at your fingertips. The graphical workpiece calibration interface makes set up an absolute breeze.  Saving you time and money.    It’s a game changer! 

Fanuc OiMF Control System
- 32 bit 10.4” Colour TFT LCD Display
- Manual guide i
- Front mounted ATA flash memory card slot
- Part Program Storage 512KB (1280 metres)
- Embedded Ethernet connection
  
HARTFORD DUAL SCREEN   
Hartford, Taiwan’s biggest Machining Centre manufacturer, has introduced the ground breaking dual screen interface.  Available for Fanuc and Mitsubishi controllers.  The touch screen interface puts all the key functions e.g. feedhold, coolant on/off etc...at your fingertips. The graphical workpiece calibration interface makes set up an absolute breeze.  Saving you time and money. 

It’s a game changer! 

  24 Tool Automatic Tool Changer  Standard is the swing arm type 24 tool automatic tool changer. - Max. tool diameter is 75mm - Max. tool length is 300mm - Max. tool weight is 6kg   

24 Tool Automatic Tool Changer
Standard is the swing arm type 24 tool automatic tool changer.
- Max. tool diameter is 75mm
- Max. tool length is 300mm
- Max. tool weight is 6kg

 

  Box Way Construction for PRO 1000  - Rigid wide stance column - The head wraps around the column ways for extreme rigidly

Box Way Construction for PRO 1000
- Rigid wide stance column
- The head wraps around the column ways for extreme rigidly

  Swarf Management  - Chink link chip conveyor, includes swarf barrow  - Coolant chip flush - Coolant Wash Gun - Air Gun

Swarf Management
- Chink link chip conveyor, includes swarf barrow
- Coolant chip flush
- Coolant Wash Gun
- Air Gun

  Box Way Construction for PRO 1000  - 4-ways in Y axis increases flat surface contact area for extreme rigidity - Table and saddle wrap around the box ways - 600 mm Y axis travel   

Box Way Construction for PRO 1000
- 4-ways in Y axis increases flat surface contact area for extreme rigidity
- Table and saddle wrap around the box ways
- 600 mm Y axis travel

 

  Spindle Chiller   - A spindle oil chiller

Spindle Chiller
- A spindle oil chiller

  HARTFORD Built Spindle   - HARTFORD built BT 40 spindle  - 8,000 rpm  - 15kW Spindle Motor Rating (S3 25%)  - 11kW Spindle Motor Rating 30 mins   - 7.5kW Spindle Motor Rating continuous   

HARTFORD Built Spindle
- HARTFORD built BT 40 spindle
- 8,000 rpm
- 15kW Spindle Motor Rating (S3 25%) 
- 11kW Spindle Motor Rating 30 mins  
- 7.5kW Spindle Motor Rating continuous

 

Optional Features

  • Fully enclosed splash guard
  • NC rotary table
  • Coolant through spindle 20 bar
  • Closed loop linear scale positioning system
  • Front mounted screw type chip conveyor
  • Coolant flushing device
  • Handy coolant gun
  • Air gun
  • 90 degree angle heat (tool type)

 

 
  Controller Upgrades  - Fanuc Function: AI, Contour Control-- II, Preread ahead 200 Blocks;   - Fanuc Function: Data server,1 gig of memory                                               - NANO smoothing (Includes Contour control II)  - Fanuc Function: Memory, Card Editing                                   - Polar coordinate, command (J818)   Automatic Power Off     

Controller Upgrades
- Fanuc Function: AI, Contour Control-- II, Preread ahead 200 Blocks; 

- Fanuc Function: Data server,1 gig of memory
                                             
- NANO smoothing (Includes Contour control II)

- Fanuc Function: Memory, Card Editing
                                 
- Polar coordinate, command (J818) 

Automatic Power Off     

  Spindle Upgrades  - 8,000 rpm  11kW - Without chiller, Belt drive           - 10,000 rpm 7.5kW - INCLUDING chiller, Belt drive                - 10,000 rpm 11kW - INCLUDING chiller, Belt drive           - 6,000 rpm 7.5kW - INCLUDING chiller, Gearbox drive           - 6,000 rpm 7.5kW - INCLUDING chiller, Gearbox drive         

Spindle Upgrades
- 8,000 rpm  11kW - Without chiller, Belt drive         

- 10,000 rpm 7.5kW - INCLUDING chiller, Belt drive         
     
- 10,000 rpm 11kW - INCLUDING chiller, Belt drive         

- 6,000 rpm 7.5kW - INCLUDING chiller, Gearbox drive         

- 6,000 rpm 7.5kW - INCLUDING chiller, Gearbox drive         

  Spindle Chiller   - A spindle oil chiller       CHECK: some spindle upgrades include a chiller as standard    

Spindle Chiller 
- A spindle oil chiller      
CHECK: some spindle upgrades include a chiller as standard

 

  Through Spindle Coolant Upgrade  Coolant Through Spindle - Option 20 bar (280 PSI)   

Through Spindle Coolant Upgrade
Coolant Through Spindle - Option 20 bar (280 PSI)

 

Machine Specs