Optional Features

  • Multiangular milling head
  • 90 degree head
  • 90 degree extension head
  • Quill support
  • Fluid coolant system
  • Coolant through spindle
  • CTS full splash guard
  • Full splash guard
  • Portable chip bucket
  • Oil mist collector system
  • Table side air blast (1 tube)
  • Auto tool length measurement
  • Foot switch for spindle clamp/unclamp
  • Closed loop linear scale positioning system
  • Air gun
Control Upgrades  Fanuc Function: AI, Contour Control-- II, Preread ahead 200 Blocks;  - Fanuc Function: Data server, 1 gig of memory;                                            - NANO smoothing: (Includes Contour control II - Polar coordinate;command (J818)  - Automatic Power Off        

Control Upgrades
Fanuc Function: AI, Contour Control-- II, Preread ahead 200 Blocks; 
- Fanuc Function: Data server, 1 gig of memory;                                           
- NANO smoothing: (Includes Contour control II
- Polar coordinate;command (J818) 
- Automatic Power Off     

 

90 Degree Extension Head  Spindle Taper: #50 - Max. tool diameter: 150mm - Tool picking: manual - Max. power: 38 kW  - Max. speed: 1000 rpm - Indexing method: manual

90 Degree Extension Head
Spindle Taper: #50
- Max. tool diameter: 150mm
- Tool picking: manual
- Max. power: 38 kW
- Max. speed: 1000 rpm
- Indexing method: manual

Tool Automatic Tool Changer  UPGRADE to the swing arm type 60 tool automatic tool changer - Max. tool diameter is 125mm - Max. tool (adjacent empty) 250mm - Max. tool length is 400mm - Max. tool weight is 25kg

Tool Automatic Tool Changer
UPGRADE to the swing arm type 60 tool automatic tool changer
- Max. tool diameter is 125mm
- Max. tool (adjacent empty) 250mm
- Max. tool length is 400mm
- Max. tool weight is 25kg

Quill Supports  Max. speed: 1500 rpm - 300mm Long         - 500mm Long         

Quill Supports
Max. speed: 1500 rpm
- 300mm Long        
- 500mm Long         

Semi  Enclosed Guarding   As pictured: Fully Enclosed Guarding  Guarding only, still has standard coolant system with mist collector Fully Enclosed Guarding with Through Spindle Coolant This option also includes through spindle coolant at 20 bar with mist collector   

Semi  Enclosed Guarding
As pictured: Fully Enclosed Guarding
Guarding only, still has standard coolant system with mist collector
Fully Enclosed Guarding with Through Spindle Coolant
This option also includes through spindle coolant at 20 bar with mist collector

 

Universal Head  Spindle Taper: #50 - Max. tool diameter: 200mm - Tool picking: manual - Max. power: 55 kW  - Max. speed: 1000 rpm - Indexing method: manual  

Universal Head
Spindle Taper: #50
- Max. tool diameter: 200mm
- Tool picking: manual
- Max. power: 55 kW
- Max. speed: 1000 rpm
- Indexing method: manual