Standard Features

  • Remote manual pulse generator

  • Convection heat exchanger in control

  • Auto power off

  • Operation finish lamp

  • RS-232 interface

  • Tool package

  • Suspension operator box

  • Coolant jets around spindle

  • Full enclosed splash guard

  • Cooling system

  • Centralized automatic lubrication system

  • Oil fluid separator

  • Two side chip of the chassis (screw type)

  • Coolant tank (with chip bucket)

  • Operational manual & electric drawing equipment

  • Fluorescent lamp x 1

  • Air blast through spindle

  • Leveling bolts and blocks

Features

24 Tool Automatic Tool Changer  Standard is the swing arm type 24 tool automatic tool changer.  - Max. tool diameter is 125mm - Max. tool length is 300mm - Max. tool weight is 15kg

24 Tool Automatic Tool Changer
Standard is the swing arm type 24 tool automatic tool changer.

- Max. tool diameter is 125mm
- Max. tool length is 300mm
- Max. tool weight is 15kg

Spindle Chiller   - A spindle oil chiller is standard equipment

Spindle Chiller
- A spindle oil chiller is standard equipment

Swarf Management  - Chip Conveyor - Hinge type - Coolant chip flush  - Coolant Wash Gun  - Air Gun

Swarf Management
- Chip Conveyor - Hinge type
- Coolant chip flush
- Coolant Wash Gun
- Air Gun

Coolant Through Spindle  Option 20 bar (280 PSI)

Coolant Through Spindle
Option 20 bar (280 PSI)

Box Way Construction  - Rigid wide stance column. - The head wraps around the column ways for extreme rigidly.  - 4-ways in Y axis increases flat surface contact area for extreme rigidity - Table and saddle wrap around the box ways - 800mm Y axis travel

Box Way Construction
- Rigid wide stance column.
- The head wraps around the column ways for extreme rigidly.
- 4-ways in Y axis increases flat surface contact area for extreme rigidity
- Table and saddle wrap around the box ways
- 800mm Y axis travel

Fanuc OiMD control system  - 32 bit 10.4” Colour TFT LCD Display  - Manual guide i - Front mounted ATA flash memory card slot  - Part Program Storage 512KB (1280 metres) - Embedded Ethernet connection - Fanuc Function: AI Contour Control-- I, Preread ahead 40 Blocks

Fanuc OiMD control system
- 32 bit 10.4” Colour TFT LCD Display
- Manual guide i
- Front mounted ATA flash memory card slot
- Part Program Storage 512KB (1280 metres)
- Embedded Ethernet connection
- Fanuc Function: AI Contour Control-- I, Preread ahead 40 Blocks